Siser Brick 600

Thin or thick, materials of all sizes have a place in garment decorating! Siser Brick 600 is a 600 micron thick, flexible heat transfer vinyl that’s designed for smaller logos and designs to add extra dimension to your garments. Brick 600’s matte finish looks great on caps, bags, and is ideal for left chest logos. Next time you feel your design is just too flat, consider giving it some dimension with Brick 600 by Siser!

 

Available in:

  • Craft roll i.e. sheet (size of one sheet: 30cm x 50cm)

Siser Brick 600 Heat Transfer Vinyl HTV Home Craft DIY

 

Description

Very thick PU plotter cut material, with polyester backing. Despite the outstanding thickness, the material grants easy cutting, weeding and application and a high washing resistance.

  • PU composition
  • High washing resistance
  • Average thickness: 600 µm
  • Cut pressure: 60g
  • Blade: 60°

 

Application Instructions

Application instructions (home iron)

  • Set iron dial between Cotton and Linen
  • Cover design with Kraft paper or non-stick cover sheet
  • Place on flat, hard surface (ironing board not recommended)
  • Press iron with medium/firm pressure (do not slide iron)
  • Press each section of design for 10-15 seconds
  • If areas of design lift after application, replace cover sheet and re-press for 10 seconds
  • Peel carrier cold

Application Instructions (heat press)

  • Cut in reverse
  • Weed excess material
  • Preheat garment for 2-3 seconds
  • Apply design at 311°F/155°C
  • Use medium/firm pressure for 20 seconds
  • Peel carrier cold

 

Washing Instructions

  • Wait 24 hours before first wash
  • Do not dry clean
  • Maximum 60°C
  • Dry on normal dryer setting
  • Do not use bleach or other aggressive chemical agents

 

Suitable Textiles

  • 100% cotton
  • 100% polyester
  • Poly/cotton blends (not for dye sublimated fabrics)

 

Certifications

  • certified Öko-Tex® Standard 100 Class II
  • REACH approved
  • CPSIA Certified

Heat Transfer Vinyl Thermal HTV Siser Brick 600 Home Craft