Siser Stripflock

This velvet like material gives your design a raised, textured, suede-like feel. Siser Stripflock looks great on caps, t-shirts, hoodie and bags. Stripflock is versatile as it can be a base layer and overlay with other heat transfer vinyl materials or more StripFlock.

 

Available in:

  • Craft roll i.e. sheet (size of one sheet: 30cm x 50cm)

Siser Stripflock Heat Transfer Vinyl HTV Velvet Home Craft DIY

 

Description

A plotter cut flock material well established in sport industry, fashion and leisure.
Washing fastness up to 60°.

  • Average thickness: 500 µm
  • Cut pressure: 100g
  • Blade: 60°
  • Can be layered

 

Application Instructions

Application instructions (home iron)

  • Set iron dial between Cotton and Linen
  • Cover design with Kraft paper or non-stick cover sheet
  • Place on flat, hard surface (ironing board not recommended)
  • Press iron with medium/firm pressure (do not slide iron)
  • Press each section of design for 15-20 seconds
  • If areas of design lift after application, replace cover sheet and re-press for 10 seconds
  • Peel carrier cold

Application Instructions (heat press)

  • Cut in reverse
  • Weed excess material
  • Preheat garment for 2-3 seconds
  • Apply design at 320°F / 160°C
  • Use medium pressure for 10-15 seconds
  • Peel carrier cold

 

Washing Instructions

  • Wait 24 hours before first wash
  • Do not dry clean
  • Max 60°C
  • Dry on normal dryer setting
  • Do not use bleach or other aggressive chemical agents

 

Suitable Textiles

  • 100% Cotton
  • 100% Polyester, elastan
  • Poly/cotton blends (not for dye sublimated fabrics)

 

Certifications

  • REACH approved

Heat Transfer Vinyl Thermal HTV Siser Stripflock Velvet Home Craft